Expert micro soldering course

CPU reballing, no-power diagnosis, data recovery and board swaps. For anyone who already has hand soldering down and wants to take on the hardest boards.

What this course is about

Beyond tackling the most common motherboard problems we go deeper into data recovery and the software you use to fix motherboard faults. You learn to diagnose and repair motherboard defects, so you can do it yourself or offer it as a service.

Not sure yet whether you are ready for this course? Take the basic micro soldering course first.

How the course is built up

  • Every skill from the basic micro soldering course
  • Reballing and replacing a CPU
  • Diagnosing a no-power fault
  • Reading the power supply with understanding
  • Data recovery
  • Repairing broken pads with jumpers
  • Board swap

For this course you may bring two of your own devices to work through together.

Why take this course?

This training matters for people who have to replace complex components in the business. For people who already have experience and have standard hand soldering down, but also need to take on smaller components with more and more tightly spaced connections.

Why at Goed Gerepareerd

You are guided by a trainer who repairs devices himself. Our trainers carry out repairs every day, which keeps the courses up to date with the latest techniques. You can ask any question you like during the course.

The course is fully prepared for you, so you need to bring nothing. We provide parts, tools, faulty devices to practise on, all the course material and a proper lunch. You can let us know about allergies in advance.

Who is this course for?

For experienced repairers. Without micro soldering experience you cannot take this course.

No small print

What the price includes

You pay the price shown above. Nothing else.

  • All the tools you need
  • Devices or motherboards to practise on
  • A proper lunch
  • A certificate at the end
  • A hotel night
  • A starter kit worth € 300,-
Wherever you want

We come to you

We run this course throughout the Netherlands and Belgium. At our own training locations, or at your workshop with your own team.

Employers, the Dutch UWV or your local council often contribute. Ask about it during the advice call.

Look further

Other courses

Basic course

Basic phone repair course

Learn the fundamentals of repairing a range of smartphones as a phone repairer with this one-day course.

Duration
8 hours
Price
€ 699,-
Extended course

Extended phone repair course

Take the extended phone repair course and learn to repair water-damaged phones and more techniques in three days.

Duration
21 hours
Price
€ 1.549,-
Basic course

Basic micro soldering course

Learn the basic micro soldering skills: replacing and reballing chips, replacing connectors and reading schematics, in this three-day course.

Duration
21 hours
Price
€ 1.749,-
Before you book

The questions we get most

Can I use subsidies for this course?
Sometimes the local council will cover the cost of training. Your case worker decides whether you qualify, and your local council is where to ask. Employers and the Dutch UWV also regularly contribute.
Who is my trainer?
We assign a different trainer to nearly every course. Each of us has our own speciality and field. To us it matters that the trainer always has at least ten years of experience in their field.
What can I expect after the course?
After the course your learning really starts. You have the knowledge and it is up to you to put it into practice. You are not on your own: you stay in close contact with your trainer and can message them every day or hop on a video call when you get stuck. You also get updates on new techniques, new models and new tools, and you can log into our forum after the course.
What if I want more support afterwards?
We always advise first looking at how you can develop on your own, and we recommend against starting another course straight away. Make good use of the remote support. After six months we look together at whether a next step makes sense, for example a one-day follow-up course.
Can I take any of the courses if I have no experience yet?
No. Some courses require at least five years of experience. You cannot take the expert micro soldering course without any micro soldering experience. Start with the basic course instead.
I already have some experience. Which level should I take?
Get in touch and we will put together a tailored course with you. That way you know you are making the right choice and not paying for things you can already do.
Can I take a course tailored to me?
Certainly. We have standard courses that cover all the basics. If you have been at it longer, we work out a plan together covering the things you have not learned yet. That is possible for nearly every course, except the CPU training.
The last step

Book your free advice call

Tell us what you want to learn and what you can already do. A training adviser calls you back and tells you honestly which course suits you. Even if there isn't one.

This button opens your own mail program with the message already written. Send it and we will call you back within one working day. Rather call us directly? 085 - 505 5120.

Your mail program is opening with your message in it. Send it and we will call you back within one working day.

Rather just call us?

On working days the person on the phone is a repairer themselves.

085 - 505 5120 info@goedgerepareerd.nl

Where the course takes place

We run courses throughout the Netherlands and Belgium. At our own training locations, and just as easily at your own workshop. Tell us during the advice call what suits you best.